Compare any two graphics cards:
GeForce GT 440 3GB vs Radeon HD 4650 1GB
IntroThe GeForce GT 440 3GB comes with core clock speeds of 594 MHz on the GPU, and 900 MHz on the 3072 MB of GDDR3 memory. It features 144 SPUs along with 24 Texture Address Units and 24 ROPs.Compare those specifications to the Radeon HD 4650 1GB, which makes use of a 55 nm design. AMD has set the core speed at 600 MHz. The GDDR3 RAM runs at a frequency of 700 MHz on this particular card. It features 320(64x5) SPUs as well as 32 Texture Address Units and 8 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the GeForce GT 440 3GB should be 93% faster than the Radeon HD 4650 1GB overall, because of its greater bandwidth. (explain)
Texel RateThe Radeon HD 4650 1GB should be quite a bit (approximately 35%) faster with regards to anisotropic filtering than the GeForce GT 440 3GB. (explain)
Pixel RateIf running with lots of anti-aliasing is important to you, then the GeForce GT 440 3GB is a better choice, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of data (measured in megabytes per second) that can be transferred past the external memory interface within a second. The number is calculated by multiplying the card's bus width by its memory speed. If it uses DDR type memory, the result should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The better the memory bandwidth, the faster the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be processed per second. This is worked out by multiplying the total amount of texture units by the core clock speed of the chip. The better this number, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip can possibly record to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of ROPs by the clock speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel fill rate is also dependant on many other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!