Compare any two graphics cards:
GeForce RTX 3060 vs Radeon RX 460 2GB
IntroThe GeForce RTX 3060 features core clock speeds of 1320 MHz on the GPU, and 1875 MHz on the (Unknown) MB of GDDR6 RAM. It features 3584 SPUs as well as 112 TAUs and 48 ROPs.Compare all of that to the Radeon RX 460 2GB, which uses a 14 nm design. AMD has set the core frequency at 1090 MHz. The GDDR5 RAM is set to run at a frequency of 1750 MHz on this card. It features 896 SPUs along with 56 TAUs and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the GeForce RTX 3060 will be 229% quicker than the Radeon RX 460 2GB in general, due to its higher data rate. (explain)
Texel RateThe GeForce RTX 3060 should be much (about 142%) faster with regards to texture filtering than the Radeon RX 460 2GB. (explain)
Pixel RateIf running with lots of anti-aliasing is important to you, then the GeForce RTX 3060 is the winner, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of information (counted in MB per second) that can be transferred past the external memory interface in a second. The number is calculated by multiplying the card's interface width by its memory clock speed. If it uses DDR type RAM, the result should be multiplied by 2 once again. If DDR5, multiply by 4 instead. The better the memory bandwidth, the faster the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be applied per second. This is calculated by multiplying the total texture units of the card by the core clock speed of the chip. The better this number, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip can possibly write to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of Raster Operations Pipelines by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel rate is also dependant on lots of other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!