Compare any two graphics cards:
GeForce GTX 980 vs Radeon RX 460
IntroThe GeForce GTX 980 features a GPU clock speed of 1126 MHz, and the 4096 MB of GDDR5 memory runs at 1750 MHz through a 256-bit bus. It also features 2048 SPUs, 128 TAUs, and 64 Raster Operation Units.Compare that to the Radeon RX 460, which has core speeds of 1090 MHz on the GPU, and 1750 MHz on the 4096 MB of GDDR5 RAM. It features 896 SPUs along with 56 Texture Address Units and 16 ROPs.
Display Graphs
BenchmarksThese are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.
3DMark Fire Strike Graphics Score
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe GeForce GTX 980 should theoretically perform a lot faster than the Radeon RX 460 in general. (explain)
Texel RateThe GeForce GTX 980 will be a lot (about 136%) faster with regards to anisotropic filtering than the Radeon RX 460. (explain)
Pixel RateThe GeForce GTX 980 should be quite a bit (more or less 313%) faster with regards to AA than the Radeon RX 460, and should be capable of handling higher resolutions without slowing down too much. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of data (counted in megabytes per second) that can be transferred past the external memory interface in one second. The number is worked out by multiplying the interface width by the speed of its memory. In the case of DDR memory, it should be multiplied by 2 again. If DDR5, multiply by 4 instead. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be applied per second. This is worked out by multiplying the total number of texture units by the core clock speed of the chip. The higher the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the most pixels the graphics card can possibly record to its local memory per second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the number of Raster Operations Pipelines by the the card's clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate also depends on quite a few other factors, most notably the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!