Submit Benchmarks!

Submit SSD Benchmark
Submit GPU Benchmark

Compare any two graphics cards:
VS

GeForce GTX 460 SE vs GeForce GTX 750 Ti

Intro

The GeForce GTX 460 SE comes with a GPU clock speed of 650 MHz, and the 1024 MB of GDDR5 memory runs at 850 MHz through a 256-bit bus. It also features 288 SPUs, 48 Texture Address Units, and 32 Raster Operation Units.

Compare all that to the GeForce GTX 750 Ti, which features a clock frequency of 1020 MHz and a GDDR5 memory speed of 1350 MHz. It also features a 128-bit bus, and uses a 28 nm design. It is made up of 640 SPUs, 40 Texture Address Units, and 16 ROPs.

Display Graphs

Hide Graphs

Power Usage and Theoretical Benchmarks

Power Consumption (Max TDP)

GeForce GTX 750 Ti 60 Watts
GeForce GTX 460 SE 150 Watts
Difference: 90 Watts (150%)

Memory Bandwidth

The GeForce GTX 460 SE should theoretically be much faster than the GeForce GTX 750 Ti in general. (explain)

GeForce GTX 460 SE 108800 MB/sec
GeForce GTX 750 Ti 86400 MB/sec
Difference: 22400 (26%)

Texel Rate

The GeForce GTX 750 Ti is quite a bit (approximately 31%) better at texture filtering than the GeForce GTX 460 SE. (explain)

GeForce GTX 750 Ti 40800 Mtexels/sec
GeForce GTX 460 SE 31200 Mtexels/sec
Difference: 9600 (31%)

Pixel Rate

The GeForce GTX 460 SE should be quite a bit (approximately 27%) faster with regards to anti-aliasing than the GeForce GTX 750 Ti, and should be capable of handling higher screen resolutions without losing too much performance. (explain)

GeForce GTX 460 SE 20800 Mpixels/sec
GeForce GTX 750 Ti 16320 Mpixels/sec
Difference: 4480 (27%)

Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit.

Price Comparison

Display Prices

Hide Prices

GeForce GTX 460 SE

Amazon.com

Check prices at:

GeForce GTX 750 Ti

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Specifications

Display Specifications

Hide Specifications

Model GeForce GTX 460 SE GeForce GTX 750 Ti
Manufacturer nVidia nVidia
Year November 2010 February 2014
Code Name GF104 GM107
Memory 1024 MB 2048 MB
Core Speed 650 MHz 1020 MHz
Memory Speed 3400 MHz 5400 MHz
Power (Max TDP) 150 watts 60 watts
Bandwidth 108800 MB/sec 86400 MB/sec
Texel Rate 31200 Mtexels/sec 40800 Mtexels/sec
Pixel Rate 20800 Mpixels/sec 16320 Mpixels/sec
Unified Shaders 288 640
Texture Mapping Units 48 40
Render Output Units 32 16
Bus Type GDDR5 GDDR5
Bus Width 256-bit 128-bit
Fab Process 40 nm 28 nm
Transistors 1950 million 1870 million
Bus PCIe x16 PCIe 3.0 x16
DirectX Version DirectX 11 DirectX 11.0
OpenGL Version OpenGL 4.1 OpenGL 4.4

Memory Bandwidth: Bandwidth is the max amount of data (counted in megabytes per second) that can be transported past the external memory interface in a second. It is worked out by multiplying the interface width by its memory speed. If it uses DDR memory, it should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions.

Texel Rate: Texel rate is the maximum texture map elements (texels) that are processed in one second. This number is calculated by multiplying the total number of texture units of the card by the core clock speed of the chip. The higher the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second.

Pixel Rate: Pixel rate is the maximum number of pixels the graphics card could possibly record to its local memory in a second - measured in millions of pixels per second. The figure is worked out by multiplying the amount of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate also depends on lots of other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to reach the max fill rate.

Display Prices

Hide Prices

GeForce GTX 460 SE

Amazon.com

Check prices at:

GeForce GTX 750 Ti

Amazon.com

Check prices at:

Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.

Comments

Be the first to leave a comment!

Your email address will not be published. Required fields are marked *


*

WordPress Anti-Spam by WP-SpamShield