Compare any two graphics cards:
GeForce 8800 GTS (G80) 320MB vs GeForce GTX 660
IntroThe GeForce 8800 GTS (G80) 320MB uses a 90 nm design. nVidia has set the core speed at 513 MHz. The GDDR3 memory is set to run at a speed of 792 MHz on this model. It features 96 SPUs as well as 48 TAUs and 20 Rasterization Operator Units.Compare that to the GeForce GTX 660, which has core clock speeds of 980 MHz on the GPU, and 1502 MHz on the 2048 MB of GDDR5 RAM. It features 960 SPUs along with 80 Texture Address Units and 24 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe GeForce GTX 660 should in theory be quite a bit faster than the GeForce 8800 GTS (G80) 320MB overall. (explain)
Texel RateThe GeForce GTX 660 will be a lot (approximately 218%) faster with regards to AF than the GeForce 8800 GTS (G80) 320MB. (explain)
Pixel RateIf using a high screen resolution is important to you, then the GeForce GTX 660 is a better choice, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of data (measured in megabytes per second) that can be transferred over the external memory interface in a second. It's worked out by multiplying the card's bus width by the speed of its memory. In the case of DDR type RAM, it must be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The higher the memory bandwidth, the better the card will be in general. It especially helps with AA, HDR and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This number is calculated by multiplying the total amount of texture units by the core clock speed of the chip. The better the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card could possibly write to the local memory in one second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the number of Render Output Units by the the core clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate also depends on quite a few other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!