Compare any two graphics cards:
Radeon HD 3850 1GB vs Radeon HD 6670 (OEM)
IntroThe Radeon HD 3850 1GB comes with a core clock speed of 668 MHz and a GDDR3 memory frequency of 828 MHz. It also makes use of a 256-bit memory bus, and uses a 55 nm design. It features 320(64x5) SPUs, 16 Texture Address Units, and 16 Raster Operation Units.Compare that to the Radeon HD 6670 (OEM), which features core clock speeds of 800 MHz on the GPU, and 1000 MHz on the 512 MB of GDDR5 RAM. It features 480 SPUs as well as 24 TAUs and 8 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the Radeon HD 6670 (OEM) should perform quite a bit faster than the Radeon HD 3850 1GB in general. (explain)
Texel RateThe Radeon HD 6670 (OEM) should be quite a bit (more or less 80%) faster with regards to anisotropic filtering than the Radeon HD 3850 1GB. (explain)
Pixel RateIf running with a high resolution is important to you, then the Radeon HD 3850 1GB is superior to the Radeon HD 6670 (OEM), and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of information (counted in megabytes per second) that can be transferred past the external memory interface in a second. It's worked out by multiplying the card's bus width by the speed of its memory. If it uses DDR type RAM, it should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed per second. This is calculated by multiplying the total texture units by the core speed of the chip. The higher the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum number of pixels the video card can possibly record to the local memory in a second - measured in millions of pixels per second. The number is worked out by multiplying the number of Raster Operations Pipelines by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate is also dependant on many other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!