Compare any two graphics cards:
Radeon RX 480 4GB vs Radeon RX 6950 XT
IntroThe Radeon RX 480 4GB makes use of a 14 nm design. AMD has set the core speed at 1120 MHz. The GDDR5 RAM is set to run at a frequency of 1750 MHz on this particular model. It features 2304 SPUs along with 144 Texture Address Units and 32 ROPs.Compare those specs to the Radeon RX 6950 XT, which features core speeds of 1925 MHz on the GPU, and 2250 MHz on the 16384 MB of GDDR6 RAM. It features 5120 SPUs along with 320 TAUs and 128 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon RX 6950 XT, in theory, should perform a lot faster than the Radeon RX 480 4GB overall. (explain)
Texel RateThe Radeon RX 6950 XT will be a lot (approximately 282%) better at AF than the Radeon RX 480 4GB. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon RX 6950 XT is a better choice, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (measured in MB per second) that can be moved across the external memory interface in a second. It is calculated by multiplying the card's interface width by its memory speed. If the card has DDR memory, the result should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The better the memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This is worked out by multiplying the total number of texture units of the card by the core speed of the chip. The higher the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics card could possibly record to the local memory in a second - measured in millions of pixels per second. The figure is calculated by multiplying the number of ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel fill rate also depends on many other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!