Compare any two graphics cards:
Geforce GTX 770 vs Radeon RX 6650 XT
IntroThe Geforce GTX 770 makes use of a 28 nm design. nVidia has clocked the core frequency at 1046 MHz. The GDDR5 memory is set to run at a frequency of 1753 MHz on this particular card. It features 1536 SPUs as well as 128 Texture Address Units and 32 ROPs.Compare those specs to the Radeon RX 6650 XT, which has core speeds of 2055 MHz on the GPU, and 2190 MHz on the 8192 MB of GDDR6 RAM. It features 2048 SPUs along with 128 Texture Address Units and 64 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon RX 6650 XT should in theory be a lot faster than the Geforce GTX 770 in general. (explain)
Texel RateThe Radeon RX 6650 XT is quite a bit (about 96%) more effective at anisotropic filtering than the Geforce GTX 770. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon RX 6650 XT is the winner, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of information (counted in megabytes per second) that can be transferred over the external memory interface in a second. The number is worked out by multiplying the card's interface width by the speed of its memory. In the case of DDR memory, it must be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be processed per second. This number is calculated by multiplying the total texture units of the card by the core clock speed of the chip. The better this number, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card can possibly write to its local memory per second - measured in millions of pixels per second. The number is worked out by multiplying the amount of ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on many other factors, most notably the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!