Compare any two graphics cards:
Radeon R9 M375X vs Radeon RX 6900 XT
IntroThe Radeon R9 M375X comes with a GPU core clock speed of 1015 MHz, and the 4096 MB of GDDR5 RAM is set to run at 1125 MHz through a 128-bit bus. It also is comprised of 640 SPUs, 40 Texture Address Units, and 16 Raster Operation Units.Compare that to the Radeon RX 6900 XT, which has core speeds of 1825 MHz on the GPU, and 2000 MHz on the 16384 MB of GDDR6 RAM. It features 5120 SPUs along with 320 TAUs and 128 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthIn theory, the Radeon RX 6900 XT is 628% faster than the Radeon R9 M375X overall, due to its higher bandwidth. (explain)
Texel RateThe Radeon RX 6900 XT should be quite a bit (about 1338%) better at texture filtering than the Radeon R9 M375X. (explain)
Pixel RateIf using a high resolution is important to you, then the Radeon RX 6900 XT is a better choice, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (in units of megabytes per second) that can be transported across the external memory interface within a second. The number is worked out by multiplying the bus width by its memory clock speed. If it uses DDR type RAM, it must be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The better the memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are applied per second. This number is worked out by multiplying the total number of texture units of the card by the core speed of the chip. The higher the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the maximum number of pixels the video card could possibly record to its local memory in a second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of colour ROPs by the the card's clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel fill rate also depends on many other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!