Compare any two graphics cards:
GeForce GTX 1050 3GB vs Radeon HD 4830 512MB
IntroThe GeForce GTX 1050 3GB features a GPU core speed of 1392 MHz, and the 3072 MB of GDDR5 memory is set to run at 1750 MHz through a 96-bit bus. It also is comprised of 768 SPUs, 48 Texture Address Units, and 24 Raster Operation Units.Compare all that to the Radeon HD 4830 512MB, which makes use of a 55 nm design. AMD has clocked the core frequency at 575 MHz. The GDDR3 memory runs at a frequency of 900 MHz on this card. It features 640(128x5) SPUs as well as 32 TAUs and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the GeForce GTX 1050 3GB should theoretically be much superior to the Radeon HD 4830 512MB in general. (explain)
Texel RateThe GeForce GTX 1050 3GB will be quite a bit (more or less 263%) more effective at AF than the Radeon HD 4830 512MB. (explain)
Pixel RateIf running with a high resolution is important to you, then the GeForce GTX 1050 3GB is superior to the Radeon HD 4830 512MB, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of information (measured in MB per second) that can be moved past the external memory interface in one second. It's calculated by multiplying the interface width by its memory speed. In the case of DDR type memory, it must be multiplied by 2 again. If DDR5, multiply by 4 instead. The better the memory bandwidth, the better the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied in one second. This number is worked out by multiplying the total texture units by the core speed of the chip. The higher this number, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels per second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics card could possibly record to the local memory in a second - measured in millions of pixels per second. The number is worked out by multiplying the amount of ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel rate also depends on many other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!