Compare any two graphics cards:
Radeon R7 250X vs Radeon RX 470
IntroThe Radeon R7 250X has a core clock speed of 1000 MHz and a GDDR5 memory frequency of 1125 MHz. It also uses a 128-bit memory bus, and makes use of a 28 nm design. It features 640 SPUs, 40 Texture Address Units, and 16 Raster Operation Units.Compare those specs to the Radeon RX 470, which has clock speeds of 926 MHz on the GPU, and 1650 MHz on the 8192 MB of GDDR5 memory. It features 2048 SPUs as well as 128 Texture Address Units and 32 ROPs.
Display Graphs
BenchmarksThese are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.
3DMark Fire Strike Graphics Score
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the Radeon RX 470 should be 193% faster than the Radeon R7 250X in general, due to its greater bandwidth. (explain)
Texel RateThe Radeon RX 470 will be a lot (about 196%) better at anisotropic filtering than the Radeon R7 250X. (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon RX 470 is superior to the Radeon R7 250X, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of data (in units of megabytes per second) that can be transported past the external memory interface in one second. It is calculated by multiplying the interface width by the speed of its memory. If the card has DDR type memory, it should be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the faster the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are applied per second. This number is calculated by multiplying the total amount of texture units of the card by the core clock speed of the chip. The better this number, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card can possibly record to its local memory in a second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel rate also depends on lots of other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!