Compare any two graphics cards:
Radeon HD 6670 (OEM) vs Radeon R9 M375
IntroThe Radeon HD 6670 (OEM) has a GPU core clock speed of 800 MHz, and the 512 MB of GDDR5 memory is set to run at 1000 MHz through a 128-bit bus. It also is made up of 480 Stream Processors, 24 Texture Address Units, and 8 Raster Operation Units.Compare those specs to the Radeon R9 M375, which comes with a clock frequency of 1015 MHz and a DDR3 memory speed of 1100 MHz. It also features a 128-bit bus, and makes use of a 28 nm design. It is made up of 640 SPUs, 40 TAUs, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthTheoretically, the Radeon HD 6670 (OEM) should be much faster than the Radeon R9 M375 overall. (explain)
Texel RateThe Radeon R9 M375 is much (more or less 111%) better at AF than the Radeon HD 6670 (OEM). (explain)
Pixel RateIf running with high levels of AA is important to you, then the Radeon R9 M375 is a better choice, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of data (counted in MB per second) that can be moved over the external memory interface within a second. It's worked out by multiplying the bus width by its memory clock speed. If the card has DDR RAM, the result should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are processed in one second. This is worked out by multiplying the total texture units by the core speed of the chip. The better this number, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card can possibly record to the local memory in a second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Render Output Units by the the card's clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel output rate also depends on lots of other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!