Compare any two graphics cards:
GeForce GTX 870M vs Radeon HD 4550 256MB
IntroThe GeForce GTX 870M features core clock speeds of 941 MHz on the GPU, and 1000 MHz on the 3072 MB of GDDR5 memory. It features 1344 SPUs along with 112 Texture Address Units and 24 ROPs.Compare those specs to the Radeon HD 4550 256MB, which features a core clock speed of 600 MHz and a DDR3 memory frequency of 800 MHz. It also uses a 64-bit memory bus, and uses a 55 nm design. It is comprised of 80(16x5) SPUs, 8 Texture Address Units, and 4 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthAs far as performance goes, the GeForce GTX 870M should theoretically be quite a bit superior to the Radeon HD 4550 256MB overall. (explain)
Texel RateThe GeForce GTX 870M should be quite a bit (more or less 2096%) more effective at AF than the Radeon HD 4550 256MB. (explain)
Pixel RateThe GeForce GTX 870M will be much (approximately 841%) faster with regards to FSAA than the Radeon HD 4550 256MB, and should be capable of handling higher resolutions without slowing down too much. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of information (counted in megabytes per second) that can be transported across the external memory interface in a second. The number is worked out by multiplying the bus width by its memory clock speed. In the case of DDR type RAM, the result should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The better the card's memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be applied in one second. This figure is worked out by multiplying the total texture units of the card by the core speed of the chip. The better the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip can possibly record to its local memory per second - measured in millions of pixels per second. The figure is worked out by multiplying the amount of colour ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel output rate also depends on lots of other factors, especially the memory bandwidth - the lower the bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!