Compare any two graphics cards:
Radeon HD 5870 vs Radeon HD 6970
IntroThe Radeon HD 5870 comes with clock speeds of 850 MHz on the GPU, and 1200 MHz on the 1024 MB of GDDR5 memory. It features 1600(320x5) SPUs along with 80 TAUs and 32 ROPs.Compare those specs to the Radeon HD 6970, which has GPU core speed of 880 MHz, and 2048 MB of GDDR5 RAM running at 1375 MHz through a 256-bit bus. It also is comprised of 1536 SPUs, 96 TAUs, and 32 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon HD 6970 should be a bit faster than the Radeon HD 5870 overall. (explain)
Texel RateThe Radeon HD 6970 is much (approximately 24%) faster with regards to anisotropic filtering than the Radeon HD 5870. (explain)
Pixel RateThe Radeon HD 6970 will be just a bit (more or less 4%) faster with regards to full screen anti-aliasing than the Radeon HD 5870, and will be capable of handling higher resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of information (counted in MB per second) that can be moved across the external memory interface in one second. It's worked out by multiplying the interface width by its memory speed. If it uses DDR RAM, the result should be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the better the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This figure is calculated by multiplying the total texture units of the card by the core clock speed of the chip. The better the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics card can possibly record to its local memory in one second - measured in millions of pixels per second. The number is worked out by multiplying the amount of ROPs by the clock speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel fill rate is also dependant on lots of other factors, most notably the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
One Response to “Radeon HD 5870 vs Radeon HD 6970”[...] presteert die kaart beter en kan die wel op mijn systeem en die vorige niet. Ter vergelijking: http://www.hwcompare.com/6353/radeon...adeon-hd-6970/ Dan zou je toch zeggen dat die hd 6970 ook teveel wordt? Of snap ik het verkeerd [...]