Compare any two graphics cards:
GeForce 8300 GS (OEM) vs Radeon HD 6870
IntroThe GeForce 8300 GS (OEM) has a clock frequency of 450 MHz and a DDR2 memory frequency of 400 MHz. It also uses a 64-bit bus, and uses a 80 nm design. It features 8 SPUs, 4 Texture Address Units, and 2 ROPs.Compare those specifications to the Radeon HD 6870, which comes with clock speeds of 900 MHz on the GPU, and 1050 MHz on the 1024 MB of GDDR5 RAM. It features 1120 SPUs as well as 56 Texture Address Units and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon HD 6870 should in theory perform a lot faster than the GeForce 8300 GS (OEM) in general. (explain)
Texel RateThe Radeon HD 6870 should be quite a bit (about 2700%) faster with regards to anisotropic filtering than the GeForce 8300 GS (OEM). (explain)
Pixel RateThe Radeon HD 6870 will be much (about 3100%) more effective at anti-aliasing than the GeForce 8300 GS (OEM), and should be able to handle higher resolutions while still performing well. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of information (counted in MB per second) that can be moved over the external memory interface in one second. The number is calculated by multiplying the card's interface width by its memory speed. If the card has DDR memory, it must be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the faster the card will be in general. It especially helps with AA, HDR and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be processed in one second. This is worked out by multiplying the total texture units by the core clock speed of the chip. The higher this number, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip can possibly write to its local memory in one second - measured in millions of pixels per second. The number is worked out by multiplying the amount of ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate also depends on many other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!