Compare any two graphics cards:
GeForce 8600 GT 256MB GDDR3 vs Radeon HD 6750 1GB
IntroThe GeForce 8600 GT 256MB GDDR3 makes use of a 80 nm design. nVidia has clocked the core frequency at 540 MHz. The GDDR3 RAM is set to run at a speed of 700 MHz on this particular model. It features 32 SPUs as well as 16 TAUs and 8 ROPs.Compare those specs to the Radeon HD 6750 1GB, which features GPU clock speed of 725 MHz, and 1024 MB of GDDR5 RAM set to run at 1000 MHz through a 128-bit bus. It also is made up of 720 Stream Processors, 36 TAUs, and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon HD 6750 1GB should perform much faster than the GeForce 8600 GT 256MB GDDR3 overall. (explain)
Texel RateThe Radeon HD 6750 1GB will be much (approximately 202%) more effective at AF than the GeForce 8600 GT 256MB GDDR3. (explain)
Pixel RateIf running with high levels of AA is important to you, then the Radeon HD 6750 1GB is a better choice, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of information (counted in MB per second) that can be transported across the external memory interface in a second. It's worked out by multiplying the card's bus width by its memory clock speed. If it uses DDR type memory, it should be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be processed in one second. This is worked out by multiplying the total amount of texture units by the core speed of the chip. The better the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second. Pixel Rate: Pixel rate is the most pixels that the graphics chip could possibly record to the local memory in one second - measured in millions of pixels per second. The number is calculated by multiplying the amount of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate is also dependant on lots of other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!