Compare any two graphics cards:
GeForce 9500 GT DDR2 vs Radeon HD 6750 1GB
IntroThe GeForce 9500 GT DDR2 comes with a GPU clock speed of 550 MHz, and the 256 MB of DDR2 memory is set to run at 500 MHz through a 128-bit bus. It also is comprised of 32 SPUs, 16 Texture Address Units, and 8 Raster Operation Units.Compare all of that to the Radeon HD 6750 1GB, which comes with core clock speeds of 725 MHz on the GPU, and 1000 MHz on the 1024 MB of GDDR5 memory. It features 720 SPUs as well as 36 TAUs and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the Radeon HD 6750 1GB should be 300% faster than the GeForce 9500 GT DDR2 overall, because of its higher bandwidth. (explain)
Texel RateThe Radeon HD 6750 1GB will be quite a bit (about 197%) more effective at texture filtering than the GeForce 9500 GT DDR2. (explain)
Pixel RateThe Radeon HD 6750 1GB should be a lot (more or less 164%) better at FSAA than the GeForce 9500 GT DDR2, and will be capable of handling higher screen resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of data (counted in megabytes per second) that can be moved across the external memory interface in a second. It's calculated by multiplying the card's interface width by the speed of its memory. In the case of DDR memory, it must be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The higher the bandwidth is, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed per second. This figure is calculated by multiplying the total amount of texture units by the core clock speed of the chip. The higher the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card could possibly record to the local memory per second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the amount of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate is also dependant on lots of other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!