Compare any two graphics cards:
GeForce 8800 GS vs GeForce GTX 1050 Ti
IntroThe GeForce 8800 GS has a GPU core speed of 550 MHz, and the 384 MB of GDDR3 RAM is set to run at 800 MHz through a 192-bit bus. It also is made up of 96 SPUs, 48 Texture Address Units, and 12 ROPs.Compare those specifications to the GeForce GTX 1050 Ti, which comes with core speeds of 1290 MHz on the GPU, and 1750 MHz on the 4096 MB of GDDR5 memory. It features 768 SPUs along with 48 TAUs and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe GeForce GTX 1050 Ti should in theory perform quite a bit faster than the GeForce 8800 GS in general. (explain)
Texel RateThe GeForce GTX 1050 Ti will be a lot (approximately 135%) more effective at anisotropic filtering than the GeForce 8800 GS. (explain)
Pixel RateThe GeForce GTX 1050 Ti will be much (about 525%) better at full screen anti-aliasing than the GeForce 8800 GS, and able to handle higher screen resolutions better. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (in units of megabytes per second) that can be moved past the external memory interface in a second. It's calculated by multiplying the interface width by the speed of its memory. If it uses DDR type RAM, it must be multiplied by 2 again. If DDR5, multiply by 4 instead. The better the card's memory bandwidth, the better the card will be in general. It especially helps with AA, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed per second. This is worked out by multiplying the total texture units by the core clock speed of the chip. The better the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the most pixels that the graphics card could possibly record to its local memory in one second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the number of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel output rate is also dependant on lots of other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!