Compare any two graphics cards:
GeForce GT 430 1GB vs GeForce GTX 1050
IntroThe GeForce GT 430 1GB features a GPU clock speed of 700 MHz, and the 1024 MB of GDDR3 memory is set to run at 900 MHz through a 128-bit bus. It also features 96 SPUs, 16 TAUs, and 4 Raster Operation Units.Compare those specs to the GeForce GTX 1050, which features core clock speeds of 1354 MHz on the GPU, and 1750 MHz on the 2048 MB of GDDR5 memory. It features 640 SPUs as well as 40 TAUs and 32 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the GeForce GTX 1050 should perform quite a bit faster than the GeForce GT 430 1GB in general. (explain)
Texel RateThe GeForce GTX 1050 is much (more or less 384%) better at AF than the GeForce GT 430 1GB. (explain)
Pixel RateThe GeForce GTX 1050 is quite a bit (about 1447%) faster with regards to anti-aliasing than the GeForce GT 430 1GB, and also should be capable of handling higher screen resolutions without losing too much performance. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (in units of megabytes per second) that can be transported past the external memory interface in a second. The number is calculated by multiplying the interface width by the speed of its memory. If it uses DDR type RAM, it should be multiplied by 2 once again. If DDR5, multiply by ANOTHER 2x. The higher the memory bandwidth, the better the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be applied per second. This number is calculated by multiplying the total amount of texture units by the core speed of the chip. The higher the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the most pixels the video card could possibly record to the local memory per second - measured in millions of pixels per second. The figure is worked out by multiplying the amount of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate is also dependant on quite a few other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!