Compare any two graphics cards:
GeForce 9600 GSO ASUS 512 vs Radeon RX 470
IntroThe GeForce 9600 GSO ASUS 512 has a core clock speed of 550 MHz and a DDR2 memory frequency of 500 MHz. It also makes use of a 128-bit memory bus, and makes use of a 65 nm design. It is comprised of 96 SPUs, 48 Texture Address Units, and 12 Raster Operation Units.Compare that to the Radeon RX 470, which has GPU core speed of 926 MHz, and 8192 MB of GDDR5 memory set to run at 1650 MHz through a 256-bit bus. It also features 2048 Stream Processors, 128 TAUs, and 32 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the Radeon RX 470 is 1220% faster than the GeForce 9600 GSO ASUS 512 overall, due to its higher data rate. (explain)
Texel RateThe Radeon RX 470 will be a lot (approximately 349%) better at anisotropic filtering than the GeForce 9600 GSO ASUS 512. (explain)
Pixel RateThe Radeon RX 470 will be much (about 349%) faster with regards to AA than the GeForce 9600 GSO ASUS 512, and capable of handling higher resolutions without losing too much performance. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of data (in units of MB per second) that can be transferred across the external memory interface within a second. It is worked out by multiplying the interface width by the speed of its memory. If it uses DDR RAM, the result should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed in one second. This is worked out by multiplying the total texture units by the core speed of the chip. The higher this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second. Pixel Rate: Pixel rate is the maximum number of pixels the graphics card could possibly record to the local memory in one second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on many other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!