Compare any two graphics cards:
Radeon HD 5770 vs Radeon R9 M395X
IntroThe Radeon HD 5770 has clock speeds of 850 MHz on the GPU, and 1200 MHz on the 1024 MB of GDDR5 RAM. It features 800(160x5) SPUs as well as 40 TAUs and 16 ROPs.Compare those specifications to the Radeon R9 M395X, which has a clock frequency of 723 MHz and a GDDR5 memory frequency of 1250 MHz. It also uses a 256-bit bus, and uses a 28 nm design. It is comprised of 2048 SPUs, 128 TAUs, and 32 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon R9 M395X should be quite a bit faster than the Radeon HD 5770 overall. (explain)
Texel RateThe Radeon R9 M395X will be a lot (approximately 172%) better at anisotropic filtering than the Radeon HD 5770. (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon R9 M395X is a better choice, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of information (counted in megabytes per second) that can be transferred past the external memory interface in a second. It is worked out by multiplying the interface width by the speed of its memory. If the card has DDR type memory, the result should be multiplied by 2 once again. If DDR5, multiply by 4 instead. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed in one second. This number is worked out by multiplying the total number of texture units by the core speed of the chip. The higher the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip can possibly record to its local memory in a second - measured in millions of pixels per second. The figure is calculated by multiplying the amount of Raster Operations Pipelines by the the core speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate also depends on many other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!