Compare any two graphics cards:
GeForce 9600 GSO 512MB vs Radeon R9 M390X
IntroThe GeForce 9600 GSO 512MB comes with a GPU core speed of 650 MHz, and the 512 MB of GDDR3 memory is set to run at 900 MHz through a 256-bit bus. It also features 96 Stream Processors, 48 TAUs, and 16 ROPs.Compare all that to the Radeon R9 M390X, which uses a 28 nm design. AMD has clocked the core speed at 723 MHz. The GDDR5 memory is set to run at a speed of 1250 MHz on this particular card. It features 2048 SPUs along with 128 Texture Address Units and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon R9 M390X should theoretically perform a lot faster than the GeForce 9600 GSO 512MB overall. (explain)
Texel RateThe Radeon R9 M390X should be a lot (approximately 197%) more effective at anisotropic filtering than the GeForce 9600 GSO 512MB. (explain)
Pixel RateThe Radeon R9 M390X should be a lot (about 122%) more effective at AA than the GeForce 9600 GSO 512MB, and capable of handling higher screen resolutions without losing too much performance. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of information (measured in MB per second) that can be moved over the external memory interface in a second. It's worked out by multiplying the card's interface width by its memory clock speed. If the card has DDR type memory, the result should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed in one second. This figure is worked out by multiplying the total amount of texture units by the core clock speed of the chip. The better the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip could possibly record to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the amount of Render Output Units by the the card's clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on many other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!