Compare any two graphics cards:
Radeon HD 4890 1GB vs Radeon R9 M370X
IntroThe Radeon HD 4890 1GB uses a 55 nm design. AMD has clocked the core speed at 1000 MHz. The GDDR5 memory runs at a speed of 975 MHz on this specific card. It features 800(160x5) SPUs as well as 40 TAUs and 16 ROPs.Compare those specs to the Radeon R9 M370X, which features core speeds of 800 MHz on the GPU, and 1125 MHz on the 2048 MB of GDDR5 memory. It features 640 SPUs along with 40 Texture Address Units and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthTheoretically, the Radeon HD 4890 1GB should perform quite a bit faster than the Radeon R9 M370X overall. (explain)
Texel RateThe Radeon HD 4890 1GB is quite a bit (approximately 25%) better at anisotropic filtering than the Radeon R9 M370X. (explain)
Pixel RateIf using lots of anti-aliasing is important to you, then the Radeon HD 4890 1GB is the winner, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of information (in units of megabytes per second) that can be transferred past the external memory interface in one second. It's calculated by multiplying the interface width by its memory clock speed. If it uses DDR memory, it must be multiplied by 2 once again. If DDR5, multiply by 4 instead. The better the memory bandwidth, the faster the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be applied in one second. This is calculated by multiplying the total amount of texture units of the card by the core clock speed of the chip. The better the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the maximum number of pixels the video card can possibly record to its local memory in a second - measured in millions of pixels per second. The figure is calculated by multiplying the amount of Raster Operations Pipelines by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel fill rate also depends on many other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the ability to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!