Compare any two graphics cards:
Radeon HD 3650 256MB vs Radeon R9 M365X
IntroThe Radeon HD 3650 256MB has a core clock frequency of 725 MHz and a DDR2 memory speed of 800 MHz. It also uses a 128-bit memory bus, and uses a 55 nm design. It is comprised of 120(24x5) SPUs, 8 TAUs, and 4 ROPs.Compare those specs to the Radeon R9 M365X, which comes with a GPU core clock speed of 925 MHz, and 4096 MB of GDDR5 RAM set to run at 1125 MHz through a 128-bit bus. It also is made up of 640 SPUs, 40 TAUs, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthIn theory, the Radeon R9 M365X is 181% quicker than the Radeon HD 3650 256MB overall, because of its higher bandwidth. (explain)
Texel RateThe Radeon R9 M365X will be a lot (about 538%) more effective at texture filtering than the Radeon HD 3650 256MB. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon R9 M365X is a better choice, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of information (measured in MB per second) that can be transferred across the external memory interface in a second. It is calculated by multiplying the card's bus width by the speed of its memory. If the card has DDR RAM, it should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are applied in one second. This number is calculated by multiplying the total amount of texture units of the card by the core speed of the chip. The better the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card can possibly record to its local memory in one second - measured in millions of pixels per second. The figure is worked out by multiplying the number of ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on lots of other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!