Compare any two graphics cards:
Radeon HD 4650 1GB vs Radeon R9 M365X
IntroThe Radeon HD 4650 1GB comes with a GPU clock speed of 600 MHz, and the 1024 MB of GDDR3 RAM runs at 700 MHz through a 128-bit bus. It also is comprised of 320(64x5) SPUs, 32 Texture Address Units, and 8 Raster Operation Units.Compare those specs to the Radeon R9 M365X, which has GPU core speed of 925 MHz, and 4096 MB of GDDR5 RAM set to run at 1125 MHz through a 128-bit bus. It also features 640 Stream Processors, 40 Texture Address Units, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthThe Radeon R9 M365X should in theory perform a lot faster than the Radeon HD 4650 1GB in general. (explain)
Texel RateThe Radeon R9 M365X should be quite a bit (more or less 93%) better at AF than the Radeon HD 4650 1GB. (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon R9 M365X is superior to the Radeon HD 4650 1GB, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (counted in megabytes per second) that can be transferred over the external memory interface within a second. It is worked out by multiplying the card's bus width by its memory clock speed. If the card has DDR type memory, it must be multiplied by 2 once again. If DDR5, multiply by 4 instead. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are processed in one second. This is worked out by multiplying the total texture units of the card by the core speed of the chip. The better this number, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card can possibly write to the local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Render Output Units by the the card's clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel rate is also dependant on lots of other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!