Compare any two graphics cards:
GeForce GT 310 vs Radeon R9 M295X
IntroThe GeForce GT 310 uses a 40 nm design. nVidia has set the core frequency at 589 MHz. The DDR2 RAM runs at a frequency of 1000 MHz on this card. It features 16 SPUs along with 8 TAUs and 4 ROPs.Compare all of that to the Radeon R9 M295X, which comes with core clock speeds of 750 MHz on the GPU, and 1375 MHz on the 4096 MB of GDDR5 memory. It features 2048 SPUs along with 128 Texture Address Units and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically, the Radeon R9 M295X should perform a lot faster than the GeForce GT 310 in general. (explain)
Texel RateThe Radeon R9 M295X will be much (about 1937%) faster with regards to AF than the GeForce GT 310. (explain)
Pixel RateThe Radeon R9 M295X should be quite a bit (about 919%) more effective at full screen anti-aliasing than the GeForce GT 310, and also will be capable of handling higher resolutions without losing too much performance. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of information (measured in MB per second) that can be moved over the external memory interface in one second. The number is worked out by multiplying the interface width by its memory speed. If the card has DDR type memory, it should be multiplied by 2 again. If DDR5, multiply by 4 instead. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed in one second. This figure is worked out by multiplying the total number of texture units by the core clock speed of the chip. The higher this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed per second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip could possibly write to its local memory in one second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Render Output Units by the the core speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on lots of other factors, especially the memory bandwidth - the lower the bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!