Compare any two graphics cards:
Radeon HD 3690/3830 vs Radeon R9 M290X
IntroThe Radeon HD 3690/3830 comes with core clock speeds of 668 MHz on the GPU, and 828 MHz on the 256 MB of GDDR3 memory. It features 320(64x5) SPUs as well as 16 Texture Address Units and 16 ROPs.Compare those specifications to the Radeon R9 M290X, which has a GPU core clock speed of 850 MHz, and 4096 MB of GDDR5 memory running at 1200 MHz through a 256-bit bus. It also features 1280 Stream Processors, 80 TAUs, and 32 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon R9 M290X should theoretically perform quite a bit faster than the Radeon HD 3690/3830 overall. (explain)
Texel RateThe Radeon R9 M290X should be a lot (approximately 536%) faster with regards to AF than the Radeon HD 3690/3830. (explain)
Pixel RateIf using a high resolution is important to you, then the Radeon R9 M290X is the winner, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of data (counted in megabytes per second) that can be transported past the external memory interface in one second. The number is worked out by multiplying the card's interface width by the speed of its memory. If the card has DDR RAM, it must be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, HDR and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed per second. This number is calculated by multiplying the total number of texture units of the card by the core clock speed of the chip. The higher the texel rate, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second. Pixel Rate: Pixel rate is the maximum amount of pixels the video card could possibly record to its local memory in a second - measured in millions of pixels per second. The number is worked out by multiplying the amount of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate is also dependant on quite a few other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!