Compare any two graphics cards:
Radeon HD 6570 (OEM) 2GB vs Radeon R9 M290X
IntroThe Radeon HD 6570 (OEM) 2GB has core clock speeds of 650 MHz on the GPU, and 1000 MHz on the 1024 MB of GDDR5 memory. It features 480 SPUs along with 24 TAUs and 8 Rasterization Operator Units.Compare those specifications to the Radeon R9 M290X, which uses a 28 nm design. AMD has clocked the core speed at 850 MHz. The GDDR5 memory is set to run at a frequency of 1200 MHz on this model. It features 1280 SPUs along with 80 Texture Address Units and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon R9 M290X should perform quite a bit faster than the Radeon HD 6570 (OEM) 2GB in general. (explain)
Texel RateThe Radeon R9 M290X is a lot (about 336%) faster with regards to anisotropic filtering than the Radeon HD 6570 (OEM) 2GB. (explain)
Pixel RateIf using lots of anti-aliasing is important to you, then the Radeon R9 M290X is the winner, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of information (in units of MB per second) that can be transported past the external memory interface in one second. The number is calculated by multiplying the card's bus width by its memory speed. If it uses DDR type RAM, the result should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed per second. This figure is calculated by multiplying the total amount of texture units by the core speed of the chip. The higher this number, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the maximum number of pixels the video card can possibly write to its local memory in a second - measured in millions of pixels per second. The number is calculated by multiplying the amount of colour ROPs by the clock speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on many other factors, most notably the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!