Compare any two graphics cards:
GeForce 9600 GSO 512MB vs GeForce GTX 960
IntroThe GeForce 9600 GSO 512MB has a GPU core clock speed of 650 MHz, and the 512 MB of GDDR3 memory is set to run at 900 MHz through a 256-bit bus. It also is comprised of 96 SPUs, 48 TAUs, and 16 ROPs.Compare those specifications to the GeForce GTX 960, which has clock speeds of 1127 MHz on the GPU, and 1750 MHz on the 2048 MB of GDDR5 memory. It features 1024 SPUs as well as 64 TAUs and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the GeForce GTX 960 will be 94% quicker than the GeForce 9600 GSO 512MB in general, due to its greater data rate. (explain)
Texel RateThe GeForce GTX 960 will be quite a bit (approximately 131%) more effective at anisotropic filtering than the GeForce 9600 GSO 512MB. (explain)
Pixel RateThe GeForce GTX 960 should be much (more or less 247%) more effective at AA than the GeForce 9600 GSO 512MB, and should be capable of handling higher screen resolutions without slowing down too much. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of information (in units of megabytes per second) that can be moved over the external memory interface in one second. It's calculated by multiplying the card's bus width by its memory clock speed. In the case of DDR type memory, it must be multiplied by 2 again. If it uses DDR5, multiply by ANOTHER 2x. The better the card's memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed in one second. This is worked out by multiplying the total number of texture units by the core speed of the chip. The higher the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip can possibly write to its local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate also depends on lots of other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!