Compare any two graphics cards:
GeForce 8800 GT 512MB vs Radeon R9 280X
IntroThe GeForce 8800 GT 512MB makes use of a 65 nm design. nVidia has set the core speed at 600 MHz. The GDDR3 memory runs at a speed of 900 MHz on this model. It features 112 SPUs along with 56 Texture Address Units and 16 ROPs.Compare all of that to the Radeon R9 280X, which has core speeds of 850 MHz on the GPU, and 1500 MHz on the 3072 MB of GDDR5 memory. It features 2048 SPUs along with 128 Texture Address Units and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the Radeon R9 280X should be 400% faster than the GeForce 8800 GT 512MB overall, due to its higher bandwidth. (explain)
Texel RateThe Radeon R9 280X should be a lot (about 224%) better at anisotropic filtering than the GeForce 8800 GT 512MB. (explain)
Pixel RateIf running with high levels of AA is important to you, then the Radeon R9 280X is a better choice, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of information (counted in MB per second) that can be transferred over the external memory interface within a second. It's calculated by multiplying the interface width by its memory clock speed. In the case of DDR type memory, it must be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with AA, HDR and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied per second. This is worked out by multiplying the total number of texture units of the card by the core clock speed of the chip. The higher this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second. Pixel Rate: Pixel rate is the most pixels the video card could possibly write to its local memory per second - measured in millions of pixels per second. The figure is worked out by multiplying the amount of colour ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate also depends on many other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!