Compare any two graphics cards:
GeForce 9800 GT 1GB vs Radeon HD 5750 1GB
IntroThe GeForce 9800 GT 1GB has core speeds of 600 MHz on the GPU, and 900 MHz on the 1024 MB of GDDR3 memory. It features 112 SPUs as well as 56 Texture Address Units and 16 ROPs.Compare those specifications to the Radeon HD 5750 1GB, which has a clock frequency of 700 MHz and a GDDR5 memory frequency of 1150 MHz. It also features a 128-bit memory bus, and uses a 40 nm design. It features 720(144x5) SPUs, 36 TAUs, and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically, the Radeon HD 5750 1GB should be much faster than the GeForce 9800 GT 1GB overall. (explain)
Texel RateThe GeForce 9800 GT 1GB is much (approximately 33%) better at texture filtering than the Radeon HD 5750 1GB. (explain)
Pixel RateThe Radeon HD 5750 1GB should be a little bit (about 17%) better at full screen anti-aliasing than the GeForce 9800 GT 1GB, and capable of handling higher screen resolutions better. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the largest amount of data (measured in MB per second) that can be transported past the external memory interface in one second. It's calculated by multiplying the bus width by the speed of its memory. If the card has DDR type RAM, it must be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be applied per second. This number is worked out by multiplying the total number of texture units of the card by the core clock speed of the chip. The higher this number, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the most pixels that the graphics chip can possibly record to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of Render Output Units by the the card's clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel fill rate is also dependant on lots of other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!