Compare any two graphics cards:
Radeon HD 3650 256MB vs Radeon HD 7770
IntroThe Radeon HD 3650 256MB comes with a clock frequency of 725 MHz and a DDR2 memory frequency of 800 MHz. It also uses a 128-bit bus, and makes use of a 55 nm design. It is made up of 120(24x5) SPUs, 8 TAUs, and 4 Raster Operation Units.Compare those specifications to the Radeon HD 7770, which has a clock frequency of 1000 MHz and a GDDR5 memory frequency of 1125 MHz. It also makes use of a 128-bit memory bus, and uses a 28 nm design. It is made up of 640 SPUs, 40 TAUs, and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the Radeon HD 7770 should in theory be quite a bit superior to the Radeon HD 3650 256MB overall. (explain)
Texel RateThe Radeon HD 7770 will be a lot (more or less 590%) more effective at texture filtering than the Radeon HD 3650 256MB. (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon HD 7770 is the winner, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of data (measured in megabytes per second) that can be transported past the external memory interface in one second. It is worked out by multiplying the card's bus width by its memory speed. If the card has DDR type RAM, it should be multiplied by 2 again. If DDR5, multiply by 4 instead. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be processed in one second. This number is calculated by multiplying the total texture units of the card by the core speed of the chip. The higher the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the most pixels the graphics card could possibly write to its local memory in a second - measured in millions of pixels per second. The number is calculated by multiplying the amount of colour ROPs by the the card's clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on many other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!