Compare any two graphics cards:
GeForce GT 340 1GB vs Radeon HD 7770
IntroThe GeForce GT 340 1GB makes use of a 40 nm design. nVidia has clocked the core frequency at 550 MHz. The GDDR5 RAM is set to run at a speed of 850 MHz on this particular model. It features 96 SPUs as well as 32 TAUs and 8 Rasterization Operator Units.Compare all of that to the Radeon HD 7770, which has a core clock frequency of 1000 MHz and a GDDR5 memory frequency of 1125 MHz. It also makes use of a 128-bit memory bus, and uses a 28 nm design. It is comprised of 640 SPUs, 40 TAUs, and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the Radeon HD 7770 should theoretically be much superior to the GeForce GT 340 1GB in general. (explain)
Texel RateThe Radeon HD 7770 should be a lot (approximately 127%) more effective at texture filtering than the GeForce GT 340 1GB. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon HD 7770 is superior to the GeForce GT 340 1GB, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of information (measured in MB per second) that can be moved across the external memory interface within a second. It's worked out by multiplying the bus width by the speed of its memory. In the case of DDR memory, it must be multiplied by 2 again. If it uses DDR5, multiply by ANOTHER 2x. The better the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are applied per second. This is calculated by multiplying the total texture units by the core speed of the chip. The better this number, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum number of pixels the video card can possibly record to its local memory in a second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel fill rate also depends on lots of other factors, especially the memory bandwidth - the lower the bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!