Compare any two graphics cards:
Radeon HD 4670 512MB vs Radeon HD 5770
IntroThe Radeon HD 4670 512MB has core speeds of 750 MHz on the GPU, and 1000 MHz on the 512 MB of GDDR4/GDDR3/DDR3/DDR2 RAM. It features 320(64x5) SPUs along with 32 TAUs and 8 ROPs.Compare those specs to the Radeon HD 5770, which has a clock frequency of 850 MHz and a GDDR5 memory speed of 1200 MHz. It also features a 128-bit memory bus, and uses a 40 nm design. It features 800(160x5) SPUs, 40 TAUs, and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the Radeon HD 5770 should be quite a bit faster than the Radeon HD 4670 512MB in general. (explain)
Texel RateThe Radeon HD 5770 is a lot (more or less 42%) more effective at anisotropic filtering than the Radeon HD 4670 512MB. (explain)
Pixel RateThe Radeon HD 5770 should be a lot (about 127%) faster with regards to AA than the Radeon HD 4670 512MB, and also should be capable of handling higher screen resolutions without losing too much performance. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of information (measured in MB per second) that can be transferred across the external memory interface within a second. It's worked out by multiplying the card's bus width by its memory speed. In the case of DDR memory, the result should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The higher the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are processed in one second. This is calculated by multiplying the total amount of texture units of the card by the core speed of the chip. The higher this number, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the most pixels the video card can possibly write to the local memory in a second - measured in millions of pixels per second. Pixel rate is worked out by multiplying the amount of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on quite a few other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!