Compare any two graphics cards:
Radeon HD 4890 2GB vs Radeon HD 6450 (OEM)
IntroThe Radeon HD 4890 2GB uses a 55 nm design. AMD has clocked the core speed at 1000 MHz. The GDDR5 RAM works at a speed of 975 MHz on this specific card. It features 800(160x5) SPUs as well as 40 Texture Address Units and 16 Rasterization Operator Units.Compare that to the Radeon HD 6450 (OEM), which has GPU clock speed of 625 MHz, and 512 MB of GDDR3 memory set to run at 800 MHz through a 64-bit bus. It also is made up of 160 Stream Processors, 8 TAUs, and 4 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon HD 4890 2GB should be 875% quicker than the Radeon HD 6450 (OEM) in general, because of its greater bandwidth. (explain)
Texel RateThe Radeon HD 4890 2GB will be much (approximately 700%) better at AF than the Radeon HD 6450 (OEM). (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon HD 4890 2GB is superior to the Radeon HD 6450 (OEM), by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (in units of MB per second) that can be moved across the external memory interface within a second. The number is calculated by multiplying the bus width by the speed of its memory. If it uses DDR type memory, it must be multiplied by 2 once again. If DDR5, multiply by 4 instead. The higher the memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that are applied in one second. This number is worked out by multiplying the total amount of texture units of the card by the core clock speed of the chip. The better the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the most pixels that the graphics chip could possibly record to the local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel fill rate also depends on many other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!