Compare any two graphics cards:
Radeon HD 5750 512MB vs Radeon HD 6990
IntroThe Radeon HD 5750 512MB features core clock speeds of 700 MHz on the GPU, and 1150 MHz on the 512 MB of GDDR5 RAM. It features 720(144x5) SPUs along with 36 TAUs and 16 Rasterization Operator Units.Compare all that to the Radeon HD 6990, which uses a 40 nm design. AMD has clocked the core speed at 830 MHz. The GDDR5 RAM runs at a frequency of 1250 MHz on this specific model. It features 1536 SPUs as well as 96 TAUs and 32 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically, the Radeon HD 6990 should perform much faster than the Radeon HD 5750 512MB overall. (explain)
Texel RateThe Radeon HD 6990 will be a lot (approximately 532%) faster with regards to AF than the Radeon HD 5750 512MB. (explain)
Pixel RateIf using lots of anti-aliasing is important to you, then the Radeon HD 6990 is the winner, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. One or more cards in this comparison are multi-core. This means that their bandwidth, texel and pixel rates are theoretically doubled - this does not mean the card will actually perform twice as fast, but only that it should in theory be able to. Actual game benchmarks will give a more accurate idea of what it's capable of. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of data (measured in MB per second) that can be transferred across the external memory interface within a second. It is calculated by multiplying the bus width by its memory speed. If the card has DDR memory, it should be multiplied by 2 again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the faster the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are processed per second. This is worked out by multiplying the total texture units of the card by the core speed of the chip. The higher the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip can possibly write to the local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel fill rate is also dependant on quite a few other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!