Compare any two graphics cards:
GeForce GT 450 (OEM) vs Radeon HD 5750 1GB
IntroThe GeForce GT 450 (OEM) features a GPU clock speed of 790 MHz, and the 1536 MB of GDDR5 RAM is set to run at 1000 MHz through a 192-bit bus. It also is comprised of 144 Stream Processors, 24 TAUs, and 24 ROPs.Compare those specifications to the Radeon HD 5750 1GB, which comes with a GPU core clock speed of 700 MHz, and 1024 MB of GDDR5 memory running at 1150 MHz through a 128-bit bus. It also is comprised of 720(144x5) SPUs, 36 Texture Address Units, and 16 Raster Operation Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe GeForce GT 450 (OEM) should in theory be a lot faster than the Radeon HD 5750 1GB in general. (explain)
Texel RateThe Radeon HD 5750 1GB should be quite a bit (more or less 33%) more effective at texture filtering than the GeForce GT 450 (OEM). (explain)
Pixel RateThe GeForce GT 450 (OEM) will be much (more or less 69%) faster with regards to AA than the Radeon HD 5750 1GB, and will be able to handle higher resolutions better. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of information (counted in megabytes per second) that can be moved over the external memory interface in one second. It is worked out by multiplying the card's bus width by the speed of its memory. In the case of DDR RAM, it must be multiplied by 2 once again. If DDR5, multiply by 4 instead. The better the memory bandwidth, the better the card will be in general. It especially helps with AA, High Dynamic Range and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are processed per second. This number is worked out by multiplying the total amount of texture units by the core speed of the chip. The higher the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in a second. Pixel Rate: Pixel rate is the maximum number of pixels the graphics card could possibly record to its local memory in one second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Render Output Units by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on lots of other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!