Compare any two graphics cards:
GeForce 8800 GT 1GB vs GeForce GT 440 1.5GB
IntroThe GeForce 8800 GT 1GB uses a 65 nm design. nVidia has set the core speed at 600 MHz. The GDDR3 memory works at a frequency of 900 MHz on this card. It features 112 SPUs as well as 56 Texture Address Units and 16 ROPs.Compare that to the GeForce GT 440 1.5GB, which has clock speeds of 594 MHz on the GPU, and 900 MHz on the 1536 MB of GDDR3 memory. It features 144 SPUs as well as 24 TAUs and 24 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthIn theory, the GeForce 8800 GT 1GB should be a lot faster than the GeForce GT 440 1.5GB overall. (explain)
Texel RateThe GeForce 8800 GT 1GB is much (about 136%) better at AF than the GeForce GT 440 1.5GB. (explain)
Pixel RateThe GeForce GT 440 1.5GB will be quite a bit (approximately 49%) more effective at full screen anti-aliasing than the GeForce 8800 GT 1GB, and also will be capable of handling higher resolutions without slowing down too much. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (measured in MB per second) that can be transferred over the external memory interface within a second. It's worked out by multiplying the card's interface width by the speed of its memory. If it uses DDR type RAM, it must be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied per second. This is calculated by multiplying the total amount of texture units by the core speed of the chip. The better the texel rate, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card can possibly record to its local memory per second - measured in millions of pixels per second. The figure is calculated by multiplying the amount of ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate is also dependant on quite a few other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the potential to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!