Compare any two graphics cards:
GeForce GT 340 1GB vs Radeon HD 4890 2GB
IntroThe GeForce GT 340 1GB comes with a core clock frequency of 550 MHz and a GDDR5 memory frequency of 850 MHz. It also features a 128-bit bus, and uses a 40 nm design. It is comprised of 96 SPUs, 32 Texture Address Units, and 8 ROPs.Compare all of that to the Radeon HD 4890 2GB, which uses a 55 nm design. AMD has clocked the core speed at 1000 MHz. The GDDR5 RAM is set to run at a frequency of 975 MHz on this model. It features 800(160x5) SPUs along with 40 TAUs and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon HD 4890 2GB should theoretically be much faster than the GeForce GT 340 1GB overall. (explain)
Texel RateThe Radeon HD 4890 2GB is much (about 127%) more effective at AF than the GeForce GT 340 1GB. (explain)
Pixel RateThe Radeon HD 4890 2GB should be a lot (more or less 264%) more effective at AA than the GeForce GT 340 1GB, and will be able to handle higher screen resolutions while still performing well. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of data (counted in megabytes per second) that can be transferred across the external memory interface in a second. It's calculated by multiplying the interface width by its memory speed. If it uses DDR type RAM, the result should be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be processed per second. This figure is calculated by multiplying the total texture units of the card by the core clock speed of the chip. The higher the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels in one second. Pixel Rate: Pixel rate is the most pixels the video card could possibly record to its local memory per second - measured in millions of pixels per second. The number is calculated by multiplying the number of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel output rate also depends on many other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!