Compare any two graphics cards:
Radeon RX 460 vs Radeon RX 6600
IntroThe Radeon RX 460 comes with a clock frequency of 1090 MHz and a GDDR5 memory speed of 1750 MHz. It also features a 128-bit memory bus, and uses a 14 nm design. It is comprised of 896 SPUs, 56 TAUs, and 16 Raster Operation Units.Compare those specifications to the Radeon RX 6600, which features GPU clock speed of 1626 MHz, and 8192 MB of GDDR6 RAM running at 1750 MHz through a 128-bit bus. It also is made up of 1792 SPUs, 112 Texture Address Units, and 64 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon RX 6600 should in theory be much faster than the Radeon RX 460 in general. (explain)
Texel RateThe Radeon RX 6600 will be quite a bit (more or less 198%) more effective at texture filtering than the Radeon RX 460. (explain)
Pixel RateIf running with a high resolution is important to you, then the Radeon RX 6600 is superior to the Radeon RX 460, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of data (measured in MB per second) that can be moved across the external memory interface within a second. It's worked out by multiplying the bus width by the speed of its memory. If the card has DDR memory, the result should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be applied in one second. This number is worked out by multiplying the total number of texture units of the card by the core speed of the chip. The better this number, the better the graphics card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in one second. Pixel Rate: Pixel rate is the maximum number of pixels the graphics card could possibly write to the local memory in one second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the number of ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate is also dependant on quite a few other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!