Compare any two graphics cards:
Radeon HD 6450 (OEM) vs Radeon RX 6700 XT
IntroThe Radeon HD 6450 (OEM) makes use of a 40 nm design. AMD has clocked the core speed at 625 MHz. The GDDR3 RAM is set to run at a frequency of 800 MHz on this specific card. It features 160 SPUs along with 8 TAUs and 4 Rasterization Operator Units.Compare that to the Radeon RX 6700 XT, which makes use of a 7 nm design. AMD has clocked the core speed at 2321 MHz. The GDDR6 memory works at a frequency of 2000 MHz on this specific card. It features 2560 SPUs along with 160 Texture Address Units and 64 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon RX 6700 XT should in theory perform quite a bit faster than the Radeon HD 6450 (OEM) in general. (explain)
Texel RateThe Radeon RX 6700 XT will be quite a bit (approximately 7327%) better at AF than the Radeon HD 6450 (OEM). (explain)
Pixel RateThe Radeon RX 6700 XT should be a lot (more or less 5842%) faster with regards to AA than the Radeon HD 6450 (OEM), and also will be capable of handling higher screen resolutions better. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (in units of MB per second) that can be transported past the external memory interface in one second. The number is calculated by multiplying the interface width by its memory clock speed. If it uses DDR memory, the result should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be processed per second. This is calculated by multiplying the total texture units of the card by the core speed of the chip. The better the texel rate, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels per second. Pixel Rate: Pixel rate is the most pixels that the graphics chip could possibly write to its local memory per second - measured in millions of pixels per second. The figure is worked out by multiplying the amount of Raster Operations Pipelines by the the core speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel fill rate is also dependant on lots of other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the potential to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!