Compare any two graphics cards:
Radeon HD 7950 vs Radeon RX 460 2GB
IntroThe Radeon HD 7950 uses a 28 nm design. AMD has set the core frequency at 800 MHz. The GDDR5 RAM is set to run at a speed of 1250 MHz on this specific card. It features 1792 SPUs along with 112 TAUs and 32 ROPs.Compare all that to the Radeon RX 460 2GB, which has a GPU core clock speed of 1090 MHz, and 2048 MB of GDDR5 memory running at 1750 MHz through a 128-bit bus. It also is comprised of 896 SPUs, 56 Texture Address Units, and 16 Raster Operation Units.
Display Graphs
BenchmarksThese are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.
Zcash Mining Hash Rate
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the Radeon HD 7950 should be a lot faster than the Radeon RX 460 2GB in general. (explain)
Texel RateThe Radeon HD 7950 will be quite a bit (more or less 47%) faster with regards to texture filtering than the Radeon RX 460 2GB. (explain)
Pixel RateThe Radeon HD 7950 is quite a bit (more or less 47%) more effective at FSAA than the Radeon RX 460 2GB, and capable of handling higher resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of information (measured in MB per second) that can be transported across the external memory interface in one second. The number is calculated by multiplying the card's bus width by the speed of its memory. In the case of DDR type memory, it should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The higher the bandwidth is, the faster the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be processed per second. This figure is worked out by multiplying the total texture units of the card by the core speed of the chip. The better this number, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics card can possibly record to its local memory in a second - measured in millions of pixels per second. The figure is worked out by multiplying the number of colour ROPs by the the core clock speed. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate also depends on lots of other factors, especially the memory bandwidth - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!