Compare any two graphics cards:
GeForce GTS 450 1GB vs Radeon R9 M395X
IntroThe GeForce GTS 450 1GB has core speeds of 783 MHz on the GPU, and 902 MHz on the 1024 MB of GDDR5 memory. It features 192 SPUs as well as 32 Texture Address Units and 16 ROPs.Compare all that to the Radeon R9 M395X, which features a core clock speed of 723 MHz and a GDDR5 memory speed of 1250 MHz. It also uses a 256-bit memory bus, and makes use of a 28 nm design. It is made up of 2048 SPUs, 128 TAUs, and 32 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically, the Radeon R9 M395X should be a lot faster than the GeForce GTS 450 1GB overall. (explain)
Texel RateThe Radeon R9 M395X will be quite a bit (more or less 269%) faster with regards to AF than the GeForce GTS 450 1GB. (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon R9 M395X is the winner, and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of information (counted in megabytes per second) that can be transferred across the external memory interface in a second. It's worked out by multiplying the bus width by the speed of its memory. If it uses DDR memory, it should be multiplied by 2 once again. If it uses DDR5, multiply by 4 instead. The better the card's memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that are applied per second. This number is worked out by multiplying the total number of texture units by the core speed of the chip. The better the texel rate, the better the video card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip could possibly write to the local memory in a second - measured in millions of pixels per second. The figure is calculated by multiplying the amount of Render Output Units by the the core clock speed. ROPs (Raster Operations Pipelines - sometimes also referred to as Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel fill rate is also dependant on quite a few other factors, especially the memory bandwidth - the lower the bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!