Compare any two graphics cards:
GeForce 825M vs Radeon R9 M395X
IntroThe GeForce 825M comes with a GPU clock speed of 850 MHz, and the 2048 MB of DDR3 memory is set to run at 900 MHz through a 64-bit bus. It also features 384 SPUs, 16 Texture Address Units, and 8 ROPs.Compare all of that to the Radeon R9 M395X, which comes with clock speeds of 723 MHz on the GPU, and 1250 MHz on the 4096 MB of GDDR5 memory. It features 2048 SPUs as well as 128 TAUs and 32 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthPerformance-wise, the Radeon R9 M395X should in theory be quite a bit better than the GeForce 825M overall. (explain)
Texel RateThe Radeon R9 M395X will be much (more or less 580%) more effective at anisotropic filtering than the GeForce 825M. (explain)
Pixel RateThe Radeon R9 M395X will be much (about 240%) faster with regards to FSAA than the GeForce 825M, and also capable of handling higher screen resolutions without slowing down too much. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (counted in MB per second) that can be moved over the external memory interface in a second. The number is calculated by multiplying the bus width by the speed of its memory. If it uses DDR type memory, it should be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the faster the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that can be applied per second. This figure is calculated by multiplying the total amount of texture units by the core clock speed of the chip. The better the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels per second. Pixel Rate: Pixel rate is the most pixels that the graphics card can possibly record to its local memory in a second - measured in millions of pixels per second. The number is worked out by multiplying the number of ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate is also dependant on quite a few other factors, most notably the memory bandwidth - the lower the bandwidth is, the lower the potential to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!