Compare any two graphics cards:
Radeon HD 6950 vs Radeon R9 M380
IntroThe Radeon HD 6950 has core clock speeds of 800 MHz on the GPU, and 1250 MHz on the 1024 MB of GDDR5 memory. It features 1408 SPUs as well as 88 Texture Address Units and 32 ROPs.Compare those specifications to the Radeon R9 M380, which has a clock frequency of 1000 MHz and a GDDR5 memory speed of 1500 MHz. It also uses a 128-bit bus, and makes use of a 28 nm design. It is made up of 640 SPUs, 40 Texture Address Units, and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthThe Radeon HD 6950, in theory, should perform quite a bit faster than the Radeon R9 M380 overall. (explain)
Texel RateThe Radeon HD 6950 will be much (more or less 76%) more effective at AF than the Radeon R9 M380. (explain)
Pixel RateThe Radeon HD 6950 should be much (about 60%) better at full screen anti-aliasing than the Radeon R9 M380, and also will be capable of handling higher resolutions while still performing well. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the maximum amount of data (counted in megabytes per second) that can be transported over the external memory interface in a second. The number is calculated by multiplying the card's bus width by the speed of its memory. If the card has DDR type memory, it must be multiplied by 2 once again. If DDR5, multiply by 4 instead. The higher the bandwidth is, the better the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be processed per second. This number is worked out by multiplying the total amount of texture units of the card by the core clock speed of the chip. The better the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels in a second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card can possibly record to the local memory in one second - measured in millions of pixels per second. The figure is worked out by multiplying the amount of ROPs by the the core speed of the card. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel rate also depends on lots of other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!