Compare any two graphics cards:
GeForce GT 210 vs Radeon R9 M375X
IntroThe GeForce GT 210 has a GPU clock speed of 589 MHz, and the 512 MB of DDR3 RAM is set to run at 800 MHz through a 64-bit bus. It also features 16 SPUs, 8 Texture Address Units, and 4 Raster Operation Units.Compare those specs to the Radeon R9 M375X, which comes with clock speeds of 1015 MHz on the GPU, and 1125 MHz on the 4096 MB of GDDR5 memory. It features 640 SPUs along with 40 Texture Address Units and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthIn theory, the Radeon R9 M375X is 463% faster than the GeForce GT 210 overall, because of its greater bandwidth. (explain)
Texel RateThe Radeon R9 M375X is quite a bit (about 762%) faster with regards to AF than the GeForce GT 210. (explain)
Pixel RateThe Radeon R9 M375X should be a lot (approximately 589%) more effective at AA than the GeForce GT 210, and also able to handle higher resolutions without losing too much performance. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Bandwidth is the max amount of data (in units of megabytes per second) that can be moved over the external memory interface within a second. It is calculated by multiplying the interface width by the speed of its memory. In the case of DDR type RAM, it must be multiplied by 2 once again. If DDR5, multiply by 4 instead. The better the bandwidth is, the faster the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be processed per second. This is calculated by multiplying the total number of texture units of the card by the core speed of the chip. The better the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the most pixels that the graphics card could possibly write to its local memory in one second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Render Output Units by the the core clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate also depends on lots of other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!