Compare any two graphics cards:
GeForce GT 315 vs Radeon R9 M365X
IntroThe GeForce GT 315 makes use of a 40 nm design. nVidia has set the core speed at 625 MHz. The DDR3 RAM works at a speed of 790 MHz on this card. It features 48 SPUs along with 16 Texture Address Units and 8 ROPs.Compare all that to the Radeon R9 M365X, which has a core clock frequency of 925 MHz and a GDDR5 memory frequency of 1125 MHz. It also uses a 128-bit memory bus, and makes use of a 28 nm design. It is comprised of 640 SPUs, 40 Texture Address Units, and 16 ROPs.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthThe Radeon R9 M365X, in theory, should perform quite a bit faster than the GeForce GT 315 in general. (explain)
Texel RateThe Radeon R9 M365X will be a lot (about 270%) more effective at AF than the GeForce GT 315. (explain)
Pixel RateThe Radeon R9 M365X should be much (more or less 196%) faster with regards to full screen anti-aliasing than the GeForce GT 315, and will be able to handle higher resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of information (in units of MB per second) that can be moved across the external memory interface in one second. It's calculated by multiplying the card's bus width by the speed of its memory. If the card has DDR type memory, it must be multiplied by 2 again. If it uses DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with AA, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be applied per second. This number is calculated by multiplying the total amount of texture units of the card by the core clock speed of the chip. The better the texel rate, the better the card will be at handling texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the maximum number of pixels that the graphics chip could possibly write to its local memory in one second - measured in millions of pixels per second. The number is worked out by multiplying the amount of Render Output Units by the the core clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel output rate is also dependant on many other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to get to the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!