Compare any two graphics cards:
GeForce GTX 870M vs Radeon HD 5570
IntroThe GeForce GTX 870M uses a 28 nm design. nVidia has clocked the core frequency at 941 MHz. The GDDR5 RAM runs at a speed of 1000 MHz on this card. It features 1344 SPUs along with 112 Texture Address Units and 24 Rasterization Operator Units.Compare those specs to the Radeon HD 5570, which makes use of a 40 nm design. AMD has clocked the core frequency at 650 MHz. The DDR3 memory works at a speed of 900 MHz on this particular model. It features 400(80x5) SPUs as well as 20 TAUs and 8 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthTheoretically speaking, the GeForce GTX 870M will be 233% faster than the Radeon HD 5570 in general, due to its greater data rate. (explain)
Texel RateThe GeForce GTX 870M should be much (more or less 711%) faster with regards to anisotropic filtering than the Radeon HD 5570. (explain)
Pixel RateIf using a high screen resolution is important to you, then the GeForce GTX 870M is a better choice, by far. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of information (in units of megabytes per second) that can be transported over the external memory interface in one second. It is calculated by multiplying the card's interface width by its memory clock speed. If the card has DDR memory, it should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with anti-aliasing, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum number of texture map elements (texels) that can be processed in one second. This is calculated by multiplying the total texture units by the core speed of the chip. The higher the texel rate, the better the video card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels per second. Pixel Rate: Pixel rate is the most pixels the video card could possibly record to the local memory per second - measured in millions of pixels per second. The figure is calculated by multiplying the number of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - aka Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel rate is also dependant on lots of other factors, most notably the memory bandwidth - the lower the memory bandwidth is, the lower the potential to reach the max fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!