Compare any two graphics cards:
Radeon HD 6570 (OEM) 1GB vs Radeon R9 390 8G
IntroThe Radeon HD 6570 (OEM) 1GB comes with core speeds of 650 MHz on the GPU, and 900 MHz on the 1024 MB of GDDR3 RAM. It features 480 SPUs as well as 24 TAUs and 8 ROPs.Compare those specifications to the Radeon R9 390 8G, which features a clock speed of 1000 MHz and a GDDR5 memory frequency of 1500 MHz. It also uses a 512-bit bus, and uses a 28 nm design. It is comprised of 2560 SPUs, 160 TAUs, and 64 ROPs.
Display Graphs
BenchmarksThese are real-world performance benchmarks that were submitted by Hardware Compare users. The scores seen here are the average of all benchmarks submitted for each respective test and hardware.
3DMark Fire Strike Graphics Score
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthThe Radeon R9 390 8G should in theory perform a lot faster than the Radeon HD 6570 (OEM) 1GB overall. (explain)
Texel RateThe Radeon R9 390 8G is quite a bit (approximately 926%) more effective at AF than the Radeon HD 6570 (OEM) 1GB. (explain)
Pixel RateIf using a high screen resolution is important to you, then the Radeon R9 390 8G is a better choice, by a large margin. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the max amount of data (measured in MB per second) that can be transported past the external memory interface in a second. It's worked out by multiplying the bus width by the speed of its memory. In the case of DDR type memory, it must be multiplied by 2 again. If DDR5, multiply by 4 instead. The higher the bandwidth is, the faster the card will be in general. It especially helps with anti-aliasing, High Dynamic Range and high resolutions. Texel Rate: Texel rate is the maximum texture map elements (texels) that can be applied in one second. This figure is worked out by multiplying the total texture units by the core clock speed of the chip. The higher the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels processed in one second. Pixel Rate: Pixel rate is the maximum amount of pixels that the graphics chip could possibly record to the local memory in one second - measured in millions of pixels per second. The number is worked out by multiplying the number of Render Output Units by the clock speed of the card. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for outputting the pixels (image) to the screen. The actual pixel output rate also depends on lots of other factors, most notably the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!