Compare any two graphics cards:
Radeon HD 4850 512MB vs Radeon HD 6670 (OEM)
IntroThe Radeon HD 4850 512MB has a GPU clock speed of 625 MHz, and the 512 MB of GDDR3 RAM runs at 993 MHz through a 256-bit bus. It also is made up of 800(160x5) SPUs, 40 TAUs, and 16 Raster Operation Units.Compare those specs to the Radeon HD 6670 (OEM), which has core clock speeds of 800 MHz on the GPU, and 1000 MHz on the 512 MB of GDDR5 RAM. It features 480 SPUs along with 24 TAUs and 8 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksPower Consumption (Max TDP)
Memory BandwidthAs far as performance goes, the Radeon HD 6670 (OEM) should in theory be just a bit superior to the Radeon HD 4850 512MB in general. (explain)
Texel RateThe Radeon HD 4850 512MB should be much (approximately 30%) more effective at anisotropic filtering than the Radeon HD 6670 (OEM). (explain)
Pixel RateIf running with a high screen resolution is important to you, then the Radeon HD 4850 512MB is superior to the Radeon HD 6670 (OEM), and very much so. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the largest amount of data (measured in MB per second) that can be transferred across the external memory interface in a second. It's worked out by multiplying the interface width by the speed of its memory. If the card has DDR type RAM, the result should be multiplied by 2 again. If DDR5, multiply by ANOTHER 2x. The better the card's memory bandwidth, the faster the card will be in general. It especially helps with anti-aliasing, HDR and high resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are applied per second. This figure is calculated by multiplying the total number of texture units of the card by the core speed of the chip. The higher this number, the better the card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied in a second. Pixel Rate: Pixel rate is the most pixels the graphics card can possibly record to its local memory per second - measured in millions of pixels per second. Pixel rate is calculated by multiplying the amount of Raster Operations Pipelines by the the core clock speed. ROPs (Raster Operations Pipelines - also sometimes called Render Output Units) are responsible for drawing the pixels (image) on the screen. The actual pixel output rate also depends on quite a few other factors, especially the memory bandwidth of the card - the lower the bandwidth is, the lower the ability to reach the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!